The Waterproof Exit Sign is designed for use oudoors and in wet locations, such as wash down areas. Waterproof exit signs feature a fiberglass housing that is hermetically sealed and prevents the entry of moisture or wetness into the body of the unit. Essentially, a waterproof exit sign is an LED exit sign encased in a weatherproof housing. The electronics of a waterproof exit sign are the same as an LED exit sign - less than 5 watts of electricity consumed at all times.
A 90-minute lead acid battery backup system keeps this wet location exit sign ililluminated after power is lost. The battery backup can be tested by a simple push button that is located on the side of the unit. An internal heater can be added for operation in cold environments, where freezing temperatures may occur. All waterproof exit signs are UL Listed and approved for use throughout the United States. Operates using 120 or 277v AC electrical power and comes with a five-year warranty.
Weatherproof - Wet Location Rated
Efficient - LED technology consumes less than 5 watts electricity
Push-to-test button with LED charging indicator
Long-lasting - 8 to 10 year EXIT sign solution
UL924 Listed for the United States
5 year warranty
The Waterproof Exit Sign can be used indoors or oudoors, in wet and cold environments. This weatherproof exit sign is designed for harsh locations, the housing is NEMA rated. The exit sign can be single or double sided. The waterproof exit sign comes standard designed for back mount, a top and side mount bracket is available for ceiling/wall installations and projects that require a double-sided waterproof exit sign.
Entire unit is constructed from polycarbonate fiberglass that is corrosion resistant and UV stabilized. Housing is grey with red letters. The weatherproof exit sign features a fully gasket housing that is hermetically sealed to prevent the entrance of any type of moisture into the housing of the unit. The weatherproof exit sign is designed for use in severely cold environments and can be outfitted with a battery heater for such scenarios.
Red or Green LEDs provide illumination while consuming less than 5 watts of electricity at all times. The red letter choice is most popular for the weatherproof exit sign but both red or green are compliant for use throughout the United States.
120/277v AC dual-voltage operation is standard. Other voltages available upon request such as 220v and 240v. AC lockout prevents battery pack discharge. Low voltage battery disconnect protects the battery pack form being damaged by long discharge periods.
Wet Location Rated. UL924 Listed for the U.S. and Canada, CS860, NFPA, Life Safety 101, UL Listed for Damp Locations. Wet location rated means that the exit sign is weatherproof and can handle direct contact with falling water, snow, sleet, and the splashing of non-corrosive liquids.
Five-year warranty on parts, five-year prorated warranty on battery. The weatherproof exit sign is manufactured under extremely high quality control standards that insure the unit will operate properly for 8-10 years in the harsh environments it is designed for.
The maintenance required for this unit is monthly and yearly testing of the battery backup system per OSHA regulations. The nickel cadmium exit sign battery in the waterproof exit sign is replaceable. The waterproof exit sign can be ordered with self testing that alleviates the monthly and yearly testing required by OSHA. The self-testing version of the waterproof exit sign is a great choice for hard to reach or harsh environment installations.
8-10 year expected lifespan on all components except replaceable battery (five-year lifespan).
Choose red or green letters.
Choose single or double sided.
Battery backup system features brownout protection and low-voltage disconnect, ensuring a long lifespan. Push button testing is easy and reliable.
Durable wet location, weatherproof construction is offered at an affordable price.
This mode is a great value, it will provide reliable EXIT lighting for 8-10 years in harsh environments.
Waterproof exit signs are suitable for surface (wall) installation. This model is suitable for indoor/oudoor and wet location installations on normally inflammable surfaces. Use two of three provided wires to connect the unit to AC power. Use the black(120v) and white(Common) wires for 120v AC connections and the red(277v) and white(Common) wires for 277v AC connections.