The Spec Grade Green LED Steel Exit Sign is constructed from a heavy-duty 20 gauge galvanized steel for superior durability and strength. It features high intensity green LEDs that gives a constant and uniform 3/4" fully ililluminated letters. This series of LED exit signs is available in a single or double face application. With the single face application, the 700 Series is available with an optional Emergency Light application. Choices of one or two 6 volt, 5.4 watt high intensity incandescent lamp heads are available for the emergency light option. A flashing LED display in emergency mode is standard with the emergency lights.
Maintenance-free NiCad batteries are used for the single or double faced application of the 700 Series Steel LED Exit Sign. Units with the emergency light option come with the standard, sealed lead-acid battery.
- 20-gauge steel housing
- Brilliant Green LEDs
- White baked enamel powder coat finish
- Left and right directional arrows can be field-applied
- Can accept a 120 or 277-volt input
- Short circuit and voltage surge protection
- 25 year warranty
- Flasher/Audible Alarm options meet ADA regulations
- EL option available - See photo insert
- Overcharge and Brown-out protected
- Low voltage disconnect eliminates deep discharge
- Maintenance-free NiCad battery (sealed lead-acid battery standard on units with EL option)
- E.T.L. listed 90 minute emergency run time, 24 hour recharge time
The strength and durability of the Spec Grade Green LED Steel Exit Sign is highly recommended in high abuse areas where it is imperative to have an operational exit sign available at all times.
The Spec Grade Green LED Steel Exit Sign features an enclosure constructed from a 20 gauge galvanized steel. 1/8" polycarbonate shield protects LEDs from high impact and abuse. It is available with a choice of white or black housing finish. Single face or double face units are available. With an optional upgrade of emergency lights for the single face units.
Green high intensity LEDs provide a bright and clear, 3/4" illumination display for the exit sign. The LEDs last longer than conventional bulb signs, providing up to 100,000 hours of use without failure. LEDs are also excellent for minimizing energy consumption, starting at only 4 watts, and are a great maintenance-free solution.
120/277v AC dual-voltage operation is standard. Other voltages available upon request such as 220v and 240v. The 700 Series provides a short circuit and voltage surge protection for the unit and also features protection from overcharging and brown-outs. The low voltage disconnect eliminates deep discharge.
This series comes with a wide range of factory options for your custom need.
- Self-Test Diagnostic
- LED Down Light
- Flasher or Buzzer
- Fire Alarm Interface
- Damp Location Listed
- Dual Circuit Input 120/277V
- 1-inch Remote Steel Unit
- Remote Capable Battery
- Tamper Proof Fastening Hardware
- Custom Legend
The Spec Grade Green LED Steel Exit Sign is U.L. 924 listed and meets or exceeds both N.E.C. requirements and N.F.P.A 101 requirements.
The components for the 700 Series are guaranteed for 25 years with a separate 5 year pro-rated warranty on the battery.
The heavy-duty, 20 gauge galvanized steel enclosure is designed to handle abuse for years. Offered with a white or black finish, and multiple options for your specific requirements, it is ideal for almost any commercial application.
The Spec Grade Green LED Steel Exit Sign provide durability and strength with a maintenance-free LED setup. Multiple factory options are available for a more specific requirement.
No special tools and hardware are required for installation. The easy-to-read manual and detailed illustration can help you setup and install in minutes. Internally housed components and battery eliminate the use of a canopy when back mounting single face exits. Mounting canopy included.