Lamp, T3 12 volt 50 watt Halogen GY6.35 Bi Pin Base - 3 Bulb Pack

It’s time to replace those halogen bulbs in your trusted emergency light. Besides, it’s very important to do so in order to keep in compliance with the state laws. With that in mind, consider our 12V 50W Bi-Pin Halogen Emergency Light Bulb.

Produced in shiny quartz glass, these tiny sized bulbs are used as a light source for several luminaries that give off powerful radiance. For example, oudoor emergency lighting or flashlights are the perfect units that this bulb can be used as a replacement.

One note of caution, the bulb’s glass should not be touched with bare hands. Oil from human hands that come in contact with the glass may cause premature failure.

This emergency lamp's small size is one major reason for its popularity. While utilizing a tungsten filament, this humbly sized tubular 2-pin solution is a great choice for energy efficiency. Adept to producing fine white light, this low voltage piece also consumes an average of 40% less power than their incandescent counterparts.

Features

• Lamp Type: Halogen
• Sub-Type: JCD
• Shape: T2
• Base: G8
• Filament: C8
• Average Lumen: 900
• Candelas: 58
• foot-candles (at 8ft): 1
• Color Temp: 2800K
• CRI: 95
• Compatible with 6-volt SLA, NiCd and NiMh emergency batteries
• Average Lifespan: 2000 hours

Application

Just about any Par 36 head with a G8 base plugin socket and wired for 50 watt consumption will accept the LP-350. This halogen emergency lamp will last about 2000 hours in normal conditions. If installing into a wet location-rated fixture, ensure there is at least partial cover from the elements (like an awning or shield) and that the watertight gasket in the composite lamp is pliable and free of cracks. The exposed bulb is not rated for marine or oudoor locations requiring a NEMA or IP rating.

Electrical Specifications

• Capacity: 12 Volts AC
• Watts Consumed: 50W

Dimensions

• Diameter: 1.75"
• Length: .75"