Wet-Location Hazardous LED Combo Exit Sign - Letter-Color: Red

NEMA 4X / IP66 LED Exit Combo with Remote Capacity - Features & Specs

The HLCWLEZU wet-location LED exit / emergency combo is engineered for harsh environments where water, corrosion, and impact are concerns. Browse our exit sign and emergency light combos for related options. Featuring a fully gasketed NEMA 4X / IP66 wet-location enclosure, MR16 LED lampheads, and a field-selectable EXIT legend color, it provides dependable emergency lighting for food-prep, hose-down, and outdoor spaces. Select models offer up to 20.8 W remote capacity and cold-weather capability.

Key Features

• NEMA 4X / IP66 wet-location rating; fully gasketed enclosure
• UL 924 compliant with 90-minute emergency operation
• Dual MR16 LED heads (3.3 W each) for wide egress spacing
• Field-selectable EXIT legend: red or green; snap-out chevrons
• Universal 120/277 VAC input; status LED & magnetic test switch
• Batteries: 6 V/12 V Ni-Cd (12/15 W) or SLA on 28 W models
• Remote capacity up to 20.8 W (model dependent; voltage matches unit)
• Options: SDT self-diagnostics; CW cold-weather kit to −20 °C; TP tamper-resistant hardware; NH exit-only
• Mounting: gasketed wall back-plate; canopy for ceiling/end mount; conduit-ready
• UV-stabilized polycarbonate housing with stainless hardware (gray)
• Compliance: NFPA 101, NEC, OSHA; CEC Title 20
• Warranty: 5-year electronics/housing; battery 5-year prorated

Spec Sheet

Download HLCWLEZU Exit & Emergency Combo Spec Sheet (PDF)

Illumination

• Two adjustable MR16 LED lampheads — 3.3 W each for wide egress spacing
• LED EXIT legend with field-selectable red EXIT or green EXIT characters

Electrical

• Dual 120/277 VAC input with bi-color status LED and magnetic test switch
• 6 V / 12 V Ni-Cd battery on 12 W / 15 W models; 28 W models use sealed lead-acid (SLA)
• Remote capacity: 4.8 W, 7.8 W, or 20.8 W (model dependent)
• Solid-state transfer switch with 90-minute emergency operation
• Two-rate charger restores a depleted battery in ~24 hours

Mounting

• Gasketed back-plate knockouts for watertight surface wall mounting
• Snap-fit canopy included for ceiling or end mount
• Field-configurable chevrons for directional compliance

Housing / Lens

• UV-stabilized polycarbonate housing (gray) with stainless-steel hardware
• NEMA 4X / IP66 rated for wet, corrosive, or wash-down areas

Options

• SDT — self-diagnostic testing (monthly, semi-annual, annual)
• CW — cold-weather heater kit (-20 °C start temperature)
• TP — tamper-resistant hardware
• NH — exit-sign-only version (remote-capable, no heads)

Warranty / Listings

• 5-year warranty on electronics and housing; battery prorated 5 years
• UL 924 listed for wet locations (0 °C – 50 °C); CEC Title 20 certified
• IP66 ingress protection; Class I, Division 2 Groups A, B, C, D rated
• Complies with NFPA 101, NEC, and OSHA

Frequently Asked Questions

Is the HLCWLEZU approved for wet and corrosive environments?

Yes. It’s NEMA 4X and IP66 rated with a fully gasketed polycarbonate enclosure and stainless hardware for hose-down, outdoor, and corrosive areas.

What is the emergency runtime?

A minimum of 90 minutes in accordance with UL 924 and NFPA 101. The charger restores a depleted battery in ~24 hours.

Which batteries are used?

6 V or 12 V Ni-Cd on 12 W and 15 W models; the 28 W model uses a sealed lead-acid (SLA) battery for higher capacity.

How much remote capacity is available?

Model-dependent: 4.8 W, 7.8 W, or 20.8 W. Remote output voltage matches the unit’s battery (6 V or 12 V).

Does it support cold-weather operation?

Yes. The optional CW package adds a heater and battery blanket for reliable starts down to -20 °C.

Are the EXIT letters field-selectable?

Yes. Choose red or green during installation. Snap-out chevrons allow left/right arrowing as required.

How does it mount?

Surface wall mount via a gasketed back-plate; a snap-fit canopy is included for ceiling or end mounting.

Is it suitable for classified (hazardous) locations?

Select configurations are rated <

Related Categories