Home » Exit Signs » Recessed Lights Exit Signs

Recessed Exit Signs

Recessed exit signs mount nearly flush to ceiling or wall surfaces so the 6-inch LED EXIT legend is visible—without a bulky box on the interior. Choose red or green letters, single- or double-face, and set field-selectable chevrons; battery-backup models keep the legend lit for 90 minutes in an outage. Browse all exit signs, explore architectural exit signs, or specify wet-location recessed signs for spray and wash-down areas.

Looking for recessed emergency lights (not signs)? See recessed emergency lights.

Flush/Concealed Trim 6" EXIT Legend Single / Double-Face Field Arrows 90-Min Backup Ceiling/Wall Recessed
Buyers Guide Tips

What to Look for in Recessed Exit Signs

  • Aperture & trim: Confirm cutout size, housing depth, and flange type (T-bar vs drywall) so the frame sits flush and the 6-inch LED EXIT legend is centered and readable along approach paths.
  • Faces & chevrons: Specify single- or double-face and set sealed field-selectable arrows during install to align with actual egress turns; verify projection clears doors and sprinklers.
  • Environment: Use damp-listed by default; for canopies/garages/wash-down, choose wet-location recessed signs so the face stays readable through 90 minutes.
  • Compliance & visibility: Battery-backup models must keep the legend lit for 90 minutes; choose red/green LEDs with uniform illumination and check local requirements (e.g., NYC letter specs) with your AHJ.
  • Access & maintenance: Ensure the indicator/test remain visible after trim install and that battery/boards are serviceable (from below or above ceiling) without damaging the finished opening.

Mount recessed exit signs so the legend sits flush and readable along approach paths—without projecting into the corridor. Set chevrons during install, verify projection clears doors/sprinklers, and seat the flange evenly so the trim remains tight to the ceiling or wall.

Coordinate the cutout and housing depth with ceilings and soffits; ensure the indicator and test control remain visible after trim install. For intersections or long runs, choose double-face models so the EXIT legend is visible from both directions.

Recessed Lights Exit Signs Red Letter
Trust & Policies

Filters
Clear all

7 Products

Recessed Exit Signs - Specs & Features

  • Legend & visibility: 6-inch LED EXIT letters (red/green) with uniform illumination for long-distance readability; battery-backup models keep the legend lit for 90 minutes.
  • Faces & chevrons: Single- or double-face panels; sealed field-selectable arrows (chevrons) to align with actual egress turns at install time.
  • Housing & trim fit: Recessed can and flush trim for T-bar/drywall; confirm cutout, depth, and flange style so the frame sits tight and projection clears doors/sprinklers.
  • Electrical & service: 120/277 VAC charger with low standby draw; indicator/test positioned for floor-level visibility; serviceable battery/boards from below or above ceiling.

FAQs About Recessed Exit Signs

What is a recessed exit sign?

A recessed exit sign installs into a wall or ceiling cavity so that only the trim and legend are exposed. It offers a clean, low-profile appearance while remaining fully code compliant.

Where are recessed signs typically installed?

These signs are ideal for lobbies, hallways, theaters, healthcare environments, hotels, and other interiors where architectural aesthetics and unobtrusive safety lighting are priorities.

Do recessed exit signs meet fire and building codes?

Yes. All models are UL 924 listed and meet NFPA 101 and OSHA life safety requirements, including battery backup and directional clarity.

Are mounting kits included?

Most recessed signs ship with universal trim kits or mounting brackets compatible with T-bar ceilings, drywall, or hard-lid surfaces.

Can I adjust the arrow direction?

Yes. Recessed signs include field-selectable chevrons that let you change the arrow direction on-site without customization or delays.

Do recessed signs come in different finishes?

Absolutely. Most models are available in white, black, brushed aluminum, or custom trim finishes to match your project’s design aesthetic.

What power and voltage are required?

Recessed LED exit signs typically run on 120/277 VAC and include an internal battery system for 90 minutes of emergency runtime.