Edge-Lit Thermoplastic Exit Sign – Red or Green - Face: Single - Letter-Color: Red

Edge-Lit Thermoplastic LED Exit Sign – Red or Green

This Edge-Lit Thermoplastic Exit Sign uses a clear acrylic panel to create a “floating” EXIT legend in red or green, with Ni-Cd battery backup for reliable UL 924 egress. Browse the full Edge-Lit Exit Signs collection, or filter by Red Letter Exit Signs and Green Letter Exit Signs.

Key Features

• UL 924 listed; damp location rated (0–50 °C)
• Field-selectable legend: red or green
• Universal mount: EZ-snap canopy for top, end, or back mounting
• EM models: 4.8 V Ni-Cd battery with 90 min runtime; solid-state transfer & two-rate charger (~24 h)
• Universal input 120/277 VAC; status LED & push-to-test
• Optional SPV 208/220/240 VAC; 2C-120/2C-277 dual-circuit (AC-only)
• Convertible single/double face; double-face includes mylar backer
• Self-adhesive chevrons with install template for directional marking
• 5 VA flame-retardant thermoplastic housing (white/black/silver); quick-snap faceplate
• Optional recessed install via field kit (where available)
• Compliance: NFPA 101, NEC, OSHA, CEC Title 20

The PLELRXTEU edge-lit thermoplastic EXIT sign pairs a low-profile housing with a crystal-clear acrylic panel for a modern, floating appearance. Select red or green LEDs; use the universal canopy for surface installs or optional kits for recessed applications. Typical emergency runtime is 90 minutes (verify per spec).

Download Edge-Lit Exit Sign Spec Sheet (PDF)

The PLELRXTEU Edge-Lit Thermoplastic Exit Sign features a crystal-clear acrylic panel and low-profile thermoplastic frame to deliver a modern “floating” EXIT legend. With selectable red or green LEDs, universal mount options, and 90-minute emergency battery backup, it’s ideal for upscale commercial interiors and damp location rated corridors.

Illumination

• Bright, energy-efficient LEDs — field-selectable red letter LED exit sign or green letter LED exit sign legend
• modern edge-lit exit sign includes acrylic panel with uniform, glare-free lighting
• Double-face models include factory-installed mylar backer (silver or white)
• Self-adhesive directional chevrons with included template

Electrical

• Universal 120/277 VAC input (optional SPV 208/220/240 VAC)
• Bi-color status LED and push-to-test button
• 4.8 V Ni-Cd battery provides 90 minutes of emergency runtime
• Solid-state transfer switch and two-rate charger
• 2C-120 / 2C-277 dual-circuit for AC-only operation

Mounting

• EZ-snap canopy for top, end, or back mount
• Field-configurable single- or double-face design

Housing / Panel

• Injection-molded 5 VA thermoplastic — white, black, or silver
• Quick-snap faceplate for tool-free service

Options

• SDT — Self-diagnostic testing
• Custom — Special wording or graphics available

Warranty / Listings

• 5-year warranty on housing & electronics; battery prorated 5 years
• UL 924 listed for damp locations (0 °C – 50 °C)
• NFPA 101, NEC, OSHA, and CEC Title 20 compliant

Dimensions

• Single-face: 10¾ in W × 7 11/16 in H × 1¾ in D
• Double-face overall width: 12 11/16 in

Frequently Asked Questions

Can I choose between red and green EXIT lettering?

Yes. The PLELRXTEU ships with a field-selectable LED panel. You can choose red or green at the time of installation.

Is the PLELRXTEU suitable for double-face applications?

Yes. The unit supports single or double-face configurations and includes a silver or white mylar backer for double-sided models.

Does this exit sign include emergency battery backup?

EM models include a 4.8 V Ni-Cd battery that provides 90 minutes of emergency illumination during power outages.

What mounting options are supported?

It includes an EZ-snap canopy for top, end, or back mounting. It’s also convertible between single and double face in the field.

Can this model be installed in damp locations?

Yes. It is UL 924 listed for damp locations and is compliant with NFPA 101, NEC, OSHA, and CEC Title 20 codes.

Related Categories