Hazardous-Location Emergency Light (Class I Div 2, NEMA 4X)

Hazardous-Location Emergency Light - Class I Div 2, NEMA 4X Fiberglass, Dual PAR36 Heads, 90 min Battery - Features & Specs

The CP-EMX Champion Extreme Hazardous-Location Emergency Light is built for environments where flammable gases or vapors may be present. This CSA-listed unit meets UL 924 and features a corrosion-resistant NEMA 4X fiberglass cabinet with two fully adjustable PAR36 lamp heads. Rated for Class I Div 2, Groups A–D, the CP-EMX delivers 90 minutes of reliable egress lighting for refineries, wastewater plants, and other industrial facilities.

Need NEMA-rated emergency lights for a hazardous location? This Class I Div 2 emergency light is built for NEMA emergency lights projects where flammable gases, vapors, wet exposure, or corrosive conditions require a tougher fixture. The NEMA 4X fiberglass cabinet, dual PAR36 heads, 90-minute battery backup, and UL 924 intent make it a fit for industrial egress paths, wastewater plants, refineries, and utility spaces. Compare the category in Hazardous Location Emergency Lights, review broader Emergency Lights, or use Wet Location Emergency Lights when hazardous classification is not required.

Need a complete solution? Pair this with our hazardous location exit signs or browse all explosion proof emergency lights.

Key Features

• Hazardous-location rated: Class I Division 2, Groups A–D (T2B); suitable for Class I, Zone 2 IIA/IIB/IIC (T1/T2); CSA Listed; meets UL 924; NEMA 4X enclosure.
• Two fully adjustable PAR36 heads with 9 W tungsten lamps; impact-resistant, weatherproof housings.
• Corrosion-resistant fiberglass cabinet with stainless-steel breather valve; gray finish.
• Battery options: sealed lead-calcium or Ni-Cd; 90-minute emergency runtime; up to 48 hour max recharge (24 hour typical).
• 120/277 VAC input; low-voltage disconnect, brownout protection, magnetic test point.
• Mounting: four stainless feet for secure wall mounting; front-hinged access panel for service.
• Supports remote lamp loads via terminal connectors.
• Options: G2 self-test/diagnostics, side-mounted heads (SMH), 120/277 V time delay (TA/TB), tamper-resistant hardware (TRH), ammeter/voltmeter, fire-alarm interface.
• Compliance: meets UL 924 & CSA C860; NFPA 101 and NEC.
• BAA/ARRA compliant.

Related Wet-Location Guides

Spec Sheet

Download Hazardous Location Emergency Unit Spec Sheet (PDF)

Illumination

• Two fully adjustable PAR36 heads with 9 W tungsten lamps.
• Impact-resistant, weatherproof heads match the gray enclosure.
• Supports remote lamp loads via terminal connectors.

Electrical

• Dual-voltage 120/277 VAC input (60 Hz).
• Maintenance-free sealed lead-calcium or Ni-Cd battery; 90-minute emergency runtime.
• Recharge: up to 48 hours maximum (24 hours typical).
• Low-voltage disconnect, magnetic test point, and brownout protection.

Mounting

• Four stainless-steel mounting feet pre-installed for secure surface wall mounting.
• Front-hinged access panel simplifies installation and maintenance.

Housing / Construction

• One-piece fiberglass cabinet resists corrosion and chemical exposure.
• NEMA 4X housing with stainless-steel breather valve.

Options & Accessories

• G2 — Guardian self-test / diagnostics.
• SMH — Side-mounted heads.
• TA / TB — 120 V / 277 V time delay (5, 10, 20 min).
• TRH — Tamper-resistant hardware.
• A — Ammeter • V — Voltmeter • A11 — Fire alarm interface.

Dimensions

• 13.5" H × 15.5" W × 6.3" D (plus approx. 5.5" head stand-off)

Warranty / Listings

• Five-year warranty on electronics and housing; battery five-year prorated.
• CSA listed; meets UL 924, CSA C860, NFPA 101, and NEC.