Hazardous Location Exit & Emergency Combo – Class I Div 2, IP66

Explosion-Proof LED Exit / Emergency Combo - Class I Div 2, UL 844/UL 924, IP66, 2× 3.6 W Heads, 90-Min Battery, Remote Cap up to 15 W - Features & Specs

The HLC Series Hazardous Location LED Exit / Emergency Combo is built to perform in tough environments, featuring a corrosion-resistant, IP66-rated fiberglass-reinforced polycarbonate enclosure, a UV-stabilized polycarbonate lens, and stainless steel hardware. Ideal for facilities requiring a hazardous location exit sign with emergency lights, the HLC is UL 844 and UL 924 listed for Class I, Division 2, Groups A–D. Two integrated 3.6 W LED lamp heads deliver up to 350 lumens of emergency lighting, and the no-head (NHR) option supports remote capacity up to 15 W. For related configurations, see Exit Sign & Emergency Light Combos.

Key Features

• Rated Class I, Division 2, Groups A–D; UL 844 and UL 924 listed; IP66 enclosure
• High-intensity red or green EXIT with 6" letters (3/4" stroke); field-selectable chevrons
• Two integrated 3.6 W LED heads, ~350 lm total; sample spacing at 7.5' MH: 47' (3' path) / 40' (6' path)
• Dual-primary 120/277 VAC, 60 Hz input; maintenance-free Ni-Cd battery
• 90-minute emergency runtime; 24-hour recharge; solid-state transfer; brownout protection; low-voltage disconnect; test button
• Remote capacity: 7.8 W (single-face), 4.8 W (double-face); NHR no-head models: up to 15 W (single-face) / 12 W (double-face)
• Cold Location (CL) option extends operating range to -20 °C to 50 °C (-4 °F to 122 °F); standard: 0 °C to 50 °C
• Construction: fiberglass-reinforced polycarbonate housing; UV-stabilized lens; stainless hardware; optional tamper-resistant hardware (TRH)

• Class I, Div 2 (Groups A–D) • UL 844 / UL 924 • IP66
• Dual 3.6 W LED heads (~350 lm total) • 90-min Ni-Cd battery
• 120/277 VAC input • push to test • brownout/LVD • solid-state transfer
• Remote capacity options (up to 15 W on NHR); field-selectable chevrons
• Fiberglass-reinforced polycarbonate enclosure with UV-stabilized lens
• Surface or pendant mount via conduit hub • optional TRH tamper hardware
• Temperature range: standard 0–50 °C; CL option -20–50 °C

Download HLC Hazardous Location Exit Combo Spec Sheet (PDF)

Illumination

• Bold red or green LEDs, fully illuminated 6" characters with 3/4" stroke
• Two 3.6 W LED heads provide ~350 lm total
• Spacing at 7.5' MH: up to 47' (3' path) / 40' (6' path)

Electrical

• Dual-voltage 120/277 VAC, 60 Hz
• 6 V or 12 V maintenance-free Ni-Cd battery; 90-minute runtime; 24-hour recharge
• Remote capacity up to 15 W (NHR single-face); see above for other configurations
• Solid-state transfer, brownout protection, and low-voltage disconnect
• Easy test button; optional G2 self-diagnostics

Construction / Finish

• Fiberglass-reinforced polycarbonate housing, gray finish
• High-impact, UV-stabilized polycarbonate lens with molded gasket for weather resistance
• Stainless hardware; optional tamper-resistant kit (TRH)

Mounting

• Surface mount with pre-installed conduit hub
• Pendant-mount compatible using the same hub

Options & Accessories

• G2 — Guardian self-diagnostics
• CL — Cold-location package (-20 °C to 50 °C / -4 °F to 122 °F)
• NHR — No-heads configuration for maximum remote capacity
• TRH — Tamper-resistant hardware

Compliance

• UL 844 and UL 924 listed as a Class I Div 2 exit sign combo (Groups A–D)
• Meets NFPA 101, NEC, OSHA, and CEC Title 20 requirements
• IP66 rated; wet-location listed

Warranty

• 5-year warranty on electronics and housing
• 5-year prorated warranty on Ni-Cd battery