You‚Äôve just received a call from OSHA after they‚Äôve received an anonymous complaint about your business. The call has alerted you that your emergency lighting system has come under question especially since you‚Äôre in a hazardous location. Now, you must bring your lights up to code or risk disciplinary actions from an surprise inspection. What can you do? How about replacing those dimming lamp heads in your Class 1 Division 1 and 1 light! Looking at our line of 12V 37.5W Sealed Beam Incandescent Emergency Light Bulbs are a great start.
The 12V 37.5W is a ideal solution for hazardous location bulb replacement with any class 1 division I, II, or III emergency lighting unit. Built in tempered glass along with a corrosion resistant brass screw terminal (SOT2) base, this lamp is also energy efficient and can stand up in conditions necessary to meet the National Electrical Code (N.E.C) compliance.
These ruggedly designed PAR 36 sealed beam incandescent lamps have an average lumen put out of 155 and center beam candle power (CBCP) of 750. The bulb‚Äôs brilliant radiance is projected sharply with a parabolic reflector, an inner circular mirror like surface.
In addition to lamp or remote head replacement, our sealed beam incandescent emergency light bulbs can be used in devices like car headlights or stage spotlights.
The incandescent sealed beam emergency light bulb great for remote or lamp head replacement. It can be used in hazardous locations where flammable gases or vapors, combustible dust, or easily ignitable fibers are present.
Compatible with the following emergency lighting fixtures:
12 volt operation, 37.5 watt consumption
This is the list of compliance for this bulb:
Ready to replace that emergency light bulb? Contact our expert customer service staff anytime at 1-800-407-0707 or email at firstname.lastname@example.org. We‚Äôre open 24/7!
Your cart is currently empty.Continue Browsing
Choose your wishlist to be added