Slim Thermoplastic LED Exit Sign with Universal Face Configuration

Choose ETXTEU when a project needs a compact thermoplastic LED exit sign with flexible legend color, face count, and mounting. It is a practical choice for tenant improvements, office corridors, small retail suites, schools, light industrial hallways, hospitality back-of-house areas, and multi-family common spaces.

• Select red or green to match the building plans, local code interpretation, or the color already used on the floor.
• Use single-face setup when the sign is viewed from one direction, such as above a doorway or at the end of a corridor.
• Use double-face setup at intersections or open corridors where the EXIT legend must be visible from both approaches.
• Snap-out chevrons support left, right, and bi-directional routing without ordering separate arrow plates.

• Universal 120/277 VAC input supports common commercial branch circuits.
• Status LED and push-to-test support monthly functional checks and annual 90-minute battery tests.
• EM models include a maintenance-free Ni-Cd battery for a minimum 90-minute emergency runtime per UL 924.
• Solid-state transfer, brownout protection, low-voltage disconnect, and two-rate charging support dependable emergency operation.
• Allow a full charge cycle before performing a full-duration discharge test after installation.

• Top mount or end mount with the included EZ-snap canopy where the fixture needs to hang from or beside the junction box.
• Wall mount with the universal backplate and knockouts for common surface installations.
• Lightweight thermoplastic construction helps installers position the sign quickly on ladders or lifts.
• Confirm final mounting height, spacing, and sightline requirements with the project plans and local code official.

• Slim thermoplastic housing reduces projection into narrow corridors and door-header locations.
• 5VA flame-retardant construction supports common commercial life-safety specifications.
• White housing blends with most walls and ceilings; black housing can suit darker finishes or contrast-driven designs.
• Tool-less face changes help crews adapt from single to double face on site.

• Keep EXIT legends visible from the direction of travel and avoid obstructions from doors, soffits, or ceiling features.
• Document push-to-test checks and annual full-duration tests for closeout and maintenance records.
• For damp-location areas such as covered entries, confirm ambient conditions remain within 0-50 C.
• For exposed outdoor, hose-down, or harsh applications, compare wet-location exit signs instead of using a standard damp-location unit.
• If the project calls for NYC-specific construction, confirm the listing and legend requirements before substituting.

Use ETXTEU for a slim, economical thermoplastic LED exit sign with red/green selection and universal face setup.

• Low-profile red/green universal-mount exit sign: choose when a DIP-switch red/green toggle and alternate low-profile housing better match the spec.
• Edge-lit thermoplastic exit sign: choose when the public-facing area needs an acrylic panel and more architectural appearance.
• Exit sign and emergency light combo: choose when the same doorway also needs adjustable emergency lamp heads.
• Wet-location exit sign: choose for exposed exterior or washdown conditions beyond standard damp-location use.

• UL 924 listed for exit signage and emergency operation where configured with battery backup.
• Damp-location rated from 0-50 C.
• Designed to support NFPA 101, NEC, OSHA, and CEC Title 20 requirements where applicable.
• 5-year limited warranty on electronics and housing; battery coverage is 5-year prorated.

• UL 924 Compliance Guide
• Exit Signs 101 - Code, Colors, Faces, and Power Options
• Exit Sign & Emergency Light Combos - When to Specify a Combo

• Confirm final fixture placement, legend color, battery-backup requirement, and local code approval for the project.